Stainless Steel Pipes
Heat Exchanger Tubes
SA213 TP304
SA213 TP304L
SA213 TP304H
SA213 TP310S
SA213 TP310H
SA213 TP316
SA213 TP316L
SA213 TP316H
SA213 TP316Ti
SA213 TP321
SA213 TP321H
SA213 TP347
SA213 TP347H
Standard ASTM A213
Product

 

 

 

 

 


Home | About Us | Product | Know How | Contact Us
   
ASTM A213/ASME SA213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
Standard: ASTM A213, ASME SA213
Equivalent Standards: EN 10216-5, DIN 17458, GOST 9941-81, GOST 9940-81
Material: TP310H, S31009
Equivalent Material: 10Ch23N18
Chemistry Composition
C, %
Si, %
Mn, %
P, %
S, %
Cr, %
Ni, %
0.04-0.10
1.00 max
2.00 max
0.045 max
0.030 max
24.0-26.0
19.0-22.0
Mechanical Properties
Tensile Strength , MPa
Yield Strength, MPa
Elongation, %
Hardness, HB
515 min
205 min
35 min
192 max
Outside Diameter & Tolerance
Hot rolled
Outside Diameter, mm
Tolerance, mm
OD≤101.6
+0.4/-0.8
101.6<OD≤190.5
+0.4/-1.2
190.5<OD≤228.6
+0.4/-1.6
Cold Drawn
Outside Diameter, mm
Tolerance, mm
OD<25.4
±0.10
25.4≤OD≤38.1
±0.15
38.1<OD<50.8
±0.20
50.8≤OD<63.5
±0.25
63.5≤OD<76.2
±0.30
76.2≤OD≤101.6
±0.38
101.6<OD≤190.5
+0.38/-0.64
190.5<OD≤228.6
+0.38/-1.14
Wall thickness & Tolerance
Hot rolled
Outside Diameter, mm
Tolerance, %

OD≤101.6, WT≤2.4

+40/-0
OD≤101.6, 2.4<WT≤3.8
+35/-0
OD≤101.6, 3.8<WT≤4.6
+33/-0
OD≤101.6, WT>4.6
+28/-0
OD>101.6, 2.4<WT≤3.8
+35/-0
OD>101.6, 3.8<WT≤4.6
+33/-0
OD>101.6, WT>4.6
+28/-0
Cold Drawn
Outside Diameter, mm
Tolerance, %
OD≤38.1
+20/-0
OD>38.1
+22/-0
ASTM A213/A213M specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. The tubing sizes and thicknesses usually furnished to ASTM A213/A213M specification are 1⁄8 in. [3.2 mm] in inside diameter to 5 in.[127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in minimum wall thickness or, if specified in the order, average wall thickness. Tubing having other diameters may be furnished, provided such tubes comply with all other requirements of ASTM A213/A213M specification.
Manufacture: tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified.
Heat Treatment: solution treatment.
Inspection & Test: chemistry composition, tensile test, hardeness test, flattening test, flaring test, NDT, surface inspection and dimension check.
Length: 5800mm; 6000mm; 6096mm; 7315mm; 11800mm; 12000mm; and so on.
Max length: 18000mm, also U bending can be offered.
Keyword: High Pressure Steel Pipe, Boiler Steel Pipe, Heat Exchanger Steel Tube, ASME SA213, SA213TP310H, ASTM A213
 
Home | About Us | Product | Know How | Contact Us
Copyright © TubeMFG. Powered by TubeSolution